lilwheezy75
Active LVC Member
Anyone know how to aim the headlights on a 94 conti? I know theres some sort of srew involved?? which one.. pictures would be greatt!!! please
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
aiming Headlights
- Thread starter lilwheezy75
- Start date
lilwheezy75
Active LVC Member
Nothing?? Nobody? not even a hint?
MichiganTeddyBear
Dedicated LVC Member
ok.. going from old memory... but probably something like this...
backside of the headlamp assy.. should be 2-3 'nuts' with metal 'clips' that hold them from turning. Clips fit into slots in the 'nuts' (the nuts don't have flats like normal nuts). remove the clip (it may break, no problem, most auto stores should have replacements, and should be cheap). the adjust the nut to move the headlight... thats how it was on my 92 cougar (3 on each side for it). should be similar on your Conti.
backside of the headlamp assy.. should be 2-3 'nuts' with metal 'clips' that hold them from turning. Clips fit into slots in the 'nuts' (the nuts don't have flats like normal nuts). remove the clip (it may break, no problem, most auto stores should have replacements, and should be cheap). the adjust the nut to move the headlight... thats how it was on my 92 cougar (3 on each side for it). should be similar on your Conti.