Advice on installing springs

[TNsilverLS]

I'm installing my Eibach pro kit today. Is there anything I need to look out for? It seems pretty straight forward from what I had found but just wanted to make sure. Thanks.

 

[Lincoln Luebbe]

Some people recommend cutting about an inch off the bumper stops... Some do some don't but thats what I've read anyway. Good luck with the install.

 

[TNsilverLS]

Some people recommend cutting about an inch off the bumper stops... Some do some don't but thats what I've read anyway. Good luck with the install.

I probably won't be cutting the bumper stops unless I need to. Appreciate it.

 

[pektel]

1 bit of advice.

use a grease pen or something to mark one of the bolts at the top of the tower and it's location. That will make re-assembly MUCH easier.

 

[LSblack00]

1 bit of advice.

use a grease pen or something to mark one of the bolts at the top of the tower and it's location. That will make re-assembly MUCH easier.

+1. Otherwise, its pretty straightforward.

 

[02LincLS]

you remove about an inch of the bushing.

 

[pektel]

huh, I never removed anything from mine. But I used springtechs. I'm wondering why you need to remove anything.

 

[Frogman]

Springs have to seat in Vertically, not Horizontally when you're all done... That's all I got.

 

[TNsilverLS]

Sounds good thanks guys. I'll post some pictures when I get it done.