Adjusting Door Striker

[soduka]

When you close the driver side door it's not flush with the quarter panel behind it and sticks out a bit. There's also a some wind noise when moving at high speeds and depending on the wind direction. Is there a specific method, and is it possible to adjusting the striker to make the door close tighter?

 

[davidm]

Yes, you can adjust the striker plate with a Torx driver. Can adjust it inward to see if anything changes.
Mine will make different wind noises depending on the direction of the wind and the temp.
Adjusting the mirror housing made a difference also.

 

[Markviiiedrea]

Yes, you can adjust the striker plate with a Torx driver.

Also, make sure to have the right size Torex and a good breaker bar, those little ass holes are in there tight and will strip out if you try to use an Allen wrench.