A/C Cabin filter will not reset

[ethosb]

According to the manual for my '03 LSV8 to reset the filter to 100% is as follows:
To reset the A/C filter monitoring system to 100% after each A/C Filter
change:
1. Press the STATUS control to
access the SystemCheck function,
the message center will display A/C
FILTER XXX% RESET FOR NEW.
2. Press and hold the RESET
control to set to 100%, the message
center will display IF NEW FILTER
HOLD RESET.
3. After a successful reset, the
message center will display A/C
FILTER LIFE SET TO 100%.

However, pressing and holding the "reset" button does nothing, but take it back to the fuel display. It does work in the oil reset. Anyone have an idea on how to reset this to new (100%)

Thanks,
ethosb

 

[joegr]

Correct procedure:

Press status.
Wait for the status you want to reset to come up.
Press and release reset.
You will then get the "hold reset" message.
Now press reset (again) and hold until it resets.

 

[ethosb]

Correct procedure:

Press status.
Wait for the status you want to reset to come up.
Press and release reset.
You will then get the "hold reset" message.
Now press reset (again) and hold until it resets.

The "Press and Release" the Reset button was the correct way. Thanks,
I was following the manual and could not get it to work.
ethosb

 

[BrianDye]

I had a prob resetting mine too it was bein a little doucher lol

 

[#1fordfan]

I'm sure you did Brian.