3 TPS Codes After Coil Job

nghtshd88

Well-Known LVC Member
Joined
Feb 1, 2011
Messages
484
Reaction score
36
Location
New Jersey
Recently did my plugs, coils and vcg's on my 04 3.0, car runs very nicely with now misfires but I got 3 TPS/APP codes now, p2100, p0223, p0122. Eveything is connected and didnt have these codes beforehand. Would spraying the TB help? Maybe it got a little jammed from sitting? I really would hate to think I got a defective coil:mad:
 
Probable Possible causes:
1. Bad (marginal) coil(s).
2. Spark plug gap(s) over/under 1mm.
3. Incorrectly seated coil(s).
4. Connector(s) to coil(s) not fully seated and latched.
5. Throttle body electrical connectors not fully seated and latched.
 
Connected everything, plugs were just right and I have no misfire.. Can the TPS set off a code for the APP?
 

Members online

Back
Top