2005 Airbag removal

kkiley

Active LVC Member
Joined
Nov 26, 2014
Messages
56
Reaction score
0
Location
CA
Trying to replace my turn signal switch on my '05 and I cannot get the airbag plug to release. I see the yellow piece in the plug going into the steering wheel assembly. But I cannot get the plug to release and I really don't want to break anything. What is the trick to get it to release?
Thanks
20170114_132112.jpg

20170114_132112.jpg
 
Trying to replace my turn signal switch on my '05 and I cannot get the airbag plug to release. I see the yellow piece in the plug going into the steering wheel assembly. But I cannot get the plug to release and I really don't want to break anything. What is the trick to get it to release?
Thanks
View attachment 828477105

Push down on the top (in the picture) of the plug. That will release a little tang that holds in the plug.
 
Push down on the top (in the picture) of the plug. That will release a little tang that holds in the plug.

Thanks LS4me. Popped right out. I just didn't want to break it.
 

Members online

No members online now.
Back
Top