2002 Lincoln LS rear sway bar bushings

[daileyls]

The rear sway bar bushings are on top of the frame in the rear. Passenger side can be done through wheel well using a socket and ratchet and pry bars. Swapping the bushing is a pain and has to be forced.

Driver side cannot be done without lowering the frame

 

[SteveOwens]

Hi, you may have to look into removing the top ball joints on one side for frt & rear sway bar swap. With the spindles out of the way, you can slowly snake the bars out. On the rear bay removal, you might want to get a 1" hole saw above each bolt to access with a swivel on the socket with a 8-10 extention. These bolts are almost inaccessible in a reasonable effort & time.
Order some 1" rubber/plastic hole covers/plugs to seal.