2000 LS Front Door Panel

[xarruda89x]

Ok guys, I searched and all the pictures on here are the Gen II door panels, anyone got a picture of the first Gen ? Gonna do some speaker work.

Front and Rear

Thanks in advance

 

[bklene50]

It's really simple. I believe the door setups are the same, because I did not know until now that all the pictures were Gen II doors and I just took off both of my fronts.

Anyways, three screws on bottom, one behind black plastic around handle, one on the part of the door that touches the B-pillar, and two in the handle pull on the door under a little flip cover. Then start popping it off around the edges.

 

[xarruda89x]

hmm, how am i suppose to remove that black plastic, i dont see a screw there, is it visable?

 

[xarruda89x]

Bump

 

[pektel]

use a flat head screwdriver... gently. It pops off very easily

 

[pektel]

The screw is under that black piece, the piece itself is just clipped in

 

[bklene50]

The black plastic comes off easily. Use a flat head on the side closest to the engine. It will come out.

 

[xarruda89x]

thanks guys