For Sale 1st gen Mark VIII parts

[Stangman]

Got a few things from the salvage yard Saturday that are for sale. Also have loads of parts that are in my storage unit that I need to get rid of to make room for my ever-growing mustang part collection!

The pertinent items are:

1st gen coolant crossover pipe - $35 + shipping

1st gen passenger headlight, in good shape, relatively clear and appears to have decent chrome inside, all mounting points are intact - $45 + shipping

Coil-over-plug conversion kit. This includes the 2nd gen cam covers, intek coil covers, and 2 wiring harnesses for the coils. No coils included... they were junk. - $150 + shipping

Battery hold down w/ long bolt (which isnt rusty!) - $10 + shipping

Will post more parts and pics hopefully tonight.

Thanks for looking!

Jesse

 

[Stangman]

Driver quality black 1st gen airbag, a few scuffs from storage, $40 + shipping. (package deal w/ steering wheel @ $50 + shipping)

Driver quality black 1st gen steering wheel. Some imperfections from being stored, most notable an indentation at the top center. Has light up cruise buttons but cannot verify if they work, right side center button is worn. $30 + shipping (package deal w/ black airbag above, $50 + shipping)

1st gen black passenger (I think) Air vent $15 + shipping

1st gen black message center, (no bulbs in display), buttons are dirty and in unknown condition. Housing overall nice shape $20 + shipping

1st gen black Lower dash cover, good shape, just dirty $15 + shipping

1st gen black fuse box door $10 + shipping

Upper steering column cover, one partially broken tab. I paid $60 for this very part from another member, and didnt need it w/ the dash I bought from the J/Y, never even used this part. $40 + shipping

 

[Stangman]

Good airbag module (bags not deployed on car it came from) and various other under dash modules $15 + shipping

Glove box slower-downer cylinder thingy, works good, $10 + shipping

3 snowflake center caps, 1 good, 1 decent, and 1 meh. $10 + shipping

1st gen black gove box door, left side is bowing out from the vinyl shrinking. $10 + shipping

2 Mark Viii hood release bar $10 each + shipping

1st gen intake elbow $5 + shipping

Midnight Opal 1st gen drivers fender, poor repaint, clear coming off in places, and has scratches. Even has the marker light screw clip! $40 + shipping

Green passenger side 1st gen fender, same deal, old paint, has scratches, still has marker light screw clip! $40 + shipping

Washer resivoir w/ motor, cap, and bracket $25 + shipping

 

[Stangman]

1st gen grille support bracket, overall good shape, bent from wreck, can be fixed. $5 + shipping

1st gen black passenger side kick panel, has a horizontal crack in it on the plastic part. $5 + shipping

1st gen headlight doors, hinges and clips are good! $25 + shipping

1st gen radiator air sheild $10 + shipping

1st gen black Drivers side kick panel, good shape. $15 + shipping (Package deal @ $25 + shipping for the pair if purchased w/ the other good one)

1st gen black passenger side kick panel, good shape, $15 + shipping (Package deal @ $25 + shipping for the pair if purchased w/ the other good one above)

1st gen hood hinges $20 for the pair, + shipping

1st gen hood latch $5 + shipping

Drivers side marker light chrome, pitted but can be painted, and easily epoxied on your your marker light. $5 + shipping

1st gen hood light harness $5 + shipping

 

[Stangman]

Factory oem electronic shock sensors $40 + shipping

Electronic vacuum thing... IMRC's perhaps? Not sure if it works. $5 + shipping

Brake switch recall harness, FREE w/ purchase of any other item if you want this!

2nd gen black rear floor mat, single. $5 + shipping

A/C condenser upper mounts, and radiator lower mounts, $5 + shipping

1st gen header panel bracket, $8 + shipping (Package deal w/ other header panel bracket, $10 + shipping)

1st gen header panel bracket, $8 + shipping (Package deal w/ other header panel bracket, $10 + shipping)

2 1st gen marker light harnesses, $10 + shipping

1st gen hood light lense, $5 + shipping

Thunderbird hood release bar $10 + shipping

Passenger side air bag, rubber gray paint coming off, you can see the shiney spots where its coming off in the pic $30 + shipping

1st gen crash/airbag sensor, $10 + shipping

Decent 1st gen headlights, all mouting hardware good. Lenses not too bad, chrome needs help. Good candidate to restore. $75 + shipping

Monroe-matic rear shocks, $20 + shipping

 

[Stangman]

B heads, unknown mileage, no cam gears, otherwise good shape. $75 + shipping

3 1st gen chrome brows. They're pitted, and none of which are show car material, but they arent bent. $10 each, + shipping

4.6L block to trans separator, $10 + shipping

Nightshades tinted outer 1st gen taillights, chrome is "eh" $15 for the pair, + shipping

Pair of non tinted taillights, chrome is "eh" $30 for the pair + shipping

Oddball right hand taillight, chrome is "eh" $5 + shipping

 

[Stangman]

I also found a message center display in good shape, and it worked when pulled.

 

[racebronco2]

I'll take the imrc vacuum canister/sensor as long as it's holding vacuum.
Pm me for payment details.

 

[Stangman]

I'll take the imrc vacuum canister/sensor as long as it's holding vacuum.
Pm me for payment details.

Will do, as soon as I can get to my storage unit.. which is probably frozen shut lol


Also, the following parts are now sold:

BOTH nicer kick panels
Glove box door
dash wedge thing
Fuse box door
Lower dash panel
dash vent
Steering wheel
steering wheel air bag

 

[Silver06S281]

thnks for the parts stangman!!! im gonna post pics on them installed once i start a build thread

 

[bigdawgz]

do u have the pass side to
I will take marker lite trim with shipping to 92545

 

[slowmkviii]

Any chance you have a good 95-96 clockspring for sale?

 

[Stangman]

thnks for the parts stangman!!! im gonna post pics on them installed once i start a build thread

no problem! Glad someone could use them!

do u have the pass side to
I will take marker lite trim with shipping to 92545

No dice. All I have is listed here.

Any chance you have a good 95-96 clockspring for sale?

No sir, I do not.