Search results for query: *

Well the trans in my 97 LSC decided to **** up, question is I have the trans out of my buddies tbird but that's a 95 and it came out of a 95 mark because his original blew. will it work? And it's been rebuilt with a jmod. I'd love to hear some good news..

I tearing into the tbird that I got from my friend, well I came across I might be in the need of a fuel pump soon, I did a fuel pressure test on my mark and at idle I'm at 29 psi when I crack the throttle it jumps up to 35 for a split second and comes back down. I pulled the vacuum supply at the...

Well I'm convinced now that first gens are faster stock for stock. Mine has cut mufflers no performance increase, and a canned tune. His is 100% bone stock. I'm on my canned tune right now, I got him from a dig by 2 cars. From a 60 roll got him by 1 car 70 roll 1/2 car by 100. So tonight I am...

Cobra manifold, composite imrc with homemade delete, 90mm MAFs, terminator intake tube, injectors cobra fuel rails. All for sale $600 obo or PM me for what you want and work a deal.

What is the capacity? I know on my 06 f150 it's like 14.5 quarts converter and pan. And it has the 4r70w. Is the marks like 13 even? Or so I looked it up on all data once before but can't remember.

And took a couple videos.

My car only topped out at 140 this morning.

And brings it home with a severe possibly dangerous brake problem. Borrows my truck to go to the beach, well comes home tonight saying its making a weird clanking noise and hard to stop. I'm like ok well I know what the clanking is (forgot anti rattle clips last brake change) the not stopping...

Any one replace one? When I did the valve cover gaskets I may have damaged the coupling connection from the accumulator to the evaporator. An i lost refrigerant and as I was recharging with the can r134a through a manifold gage set it finally gave and burst. Just wondering if anyone replaced one...

I am at work (used dealership) and am working on this 01 town car the rear air springs were damaged (old) I replaced them and I can hear the compressor going but it doesn't wont to lift at all not even an inch don't hear a leak or anything and yes I turned the switch off before rising it. The...

I'm at work working on this 2001 town car and I'm supposed to replace these air springs. Step by step 1. Turn off air ride switch. 2. Jacked up car. 3. Pulled clips on top of springs. 4. Unhooked air supply line. 5. Remove and replace spring 6. Put clip back on 7. Put air supply to spring 8...

Ok so My buddy ran into some money problems he's got a 95 thunderbird that he did a mark viii swap with cobra cams and cobra manifold, he has the rear subframe from a 97 mark with 4.10s and a locker. 3800 stall and jmod trans. It is still in the process of needing to be done. He wants $200 for...

I think mine is starting to take a **** or something. I went to the drive in movie theatre with the girlfriend and while listening to the movie it was extremely staticky but I was the only one with the problem. I was also fairly close to the main building to get good enough reception. Has anyone...

Ok got them installed but they are pointed super high. Adjusted all the way down and the regular beam s higher than the high beam. Anyone else have this problem or had?

For the ones that have them are you running it through the radiator still? Inlet through radiator done through external cooler then back? Or just straight through the external one?

Plan on changing these today and changing plugs. I know they are either bad or about to be bad. With 126k I'm sure they never been done so wish me luck lol. Shouldn't be too hard of a project.

So I work at a used dealership as a mechanic. So we have this 2001 BMW 325i and it has an oil leak, I'm checking it out figure it's the rear main seal. That's besides the point after checking get it off the rack and check put a quart of synthetic in. Go to fire it up its smoking like a chimney...

Where the hell is it located I'm either blind or stupid.

Earlier this month I had gotten a CEL for my speed sensor when the holding bracket bolt fell out and wasn't registering. Got that fixed BTW, but I had skimmed through my scanner today just for ****s and giggles, i like it cause it stores the last vehicles codes but only the last vehicle it read...

Just wondering if its possible to get reimbursed by the city you live in for damage caused by lack of maintenance on the roadways? I had just went through this massive hole in the road, I mean it wasn't a pothole it was a fugging hole. I'm 6'2 and I'm sure it would go as far down as to half of...