Search results for query: *

slid under a truck. Need a hood, lights, grille, probably a radiator and other parts. I'm not sure how many of the parts are damaged or can be used (looks like mounting tabs and things of that nature would prevent me from using certain things like the headlights :( ) I'm going to rent a...

Darn car is ticking every morning! I'm wondering if its just the extreme cold right now. If not, I hope I blow the engine up so I can get a new one soon! :D ok, although this makes more sense in here, I meant to put this under the Mark8 forum.

Any one here ever try to do the fast bag system that Kale came up with? I was thinking about it but would like to talk to someone that has actually done it first before I get into it and find out that its more involved than I think.

Well, I decided I'm going to put some gauges in the car but can't figure out what I want. I know one I really want is a fuel pressure gauge. I'm just not sure what the other should be. Yes I need two! it would look stupid to have only one IMO. So what do you guys think? Voltage maybe? I...

what are the part numbers for walbro fuel pumps that are direct replacement for the marks? I can find the 255lph all over the place but I'm looking for the 190 and 150lph pumps. I know of places that sell them but I can find them cheaper else where if I only knew the part number, plus I need...

I replaced my shocks and shock mounts over the weekend. Car rides beautifully now! Only one problem I found, I was playing around with an older Firebird Formula and went to launch and couldn't get any traction! With my old shocks, my tail would squat down, lift the front, and launch hard...

My wheel bearings are bad again! About a year ago I replaced both fronts. I think the driver side is bad. Anyone ever had them go so quickly? I'm wondering if they are going quicker because of larger wheels and tires or because my front suspension needs to be replaced. anyone have any ideas?

anyone know where I can get braided lines? I looking for them on the front. I suppose there are lots of places that I can get them but I don't know the length or anything. Also, I was told that if I upgraded the rear brakes to 13" that I would need to get another line for the e-brake cause...

Anyone know if there is a difference? I would suspect not but I've heard from someone that they are different sizes.

working on my '95 and had to remove the intake cause I'm replacing my injectors. I was playing around with the throttle body cause its dirty and I know it has to be cleaned. I noticed when I pull the throttle cable the left valve doesn't open until the cable is pulled completely open (as in at...

has anyone ever tried repairing struts? Here's the problem, my front end has been dropping for the past week. sprayed down both bags, nothing! Well, today I tried at it again and found that one of the struts is leaking from top. I'm confused here because there's a nut and bolt on top. I'm...

everytime I go into reverse I get a squeal like my brakes are bad, but I'm not applying them. Only in reverse, forward not a noise! I took off one of the wheels and really didn't see anything unusual. Btw, I have cross drilled rotors. Any clue on what I should check? I was starting to think...

Well, the CE came on yesterday with the code P0430. Trying to figure out what might be causing it. I'm thinking its because I'm burning oil. The "O" rings on my vavle covers are bad on several of the spark plugs. I knew the problem existed but have never did anything about it. I basically...

I want to rebuild the front end with polyurethane bushings. I need everything! does anyone have any recommendation where to get it. I used to know of a couple of websites that had complete kits but I've been having a hard time getting on to their websites.

I tore two mustang rearends apart for the traction lock and I have a third laying around. The question I have is how many of you guys that have done the same thing have had the diff rebuilt? For those of you that never had them rebuilt, have you had any problems with them? I'm just worried...

I had the CE light pop on the other day and ran the codes and came up with P0352, malfunction for ingintion coil B. what the hell does that mean? I'm probably going to check the boots out to see if any have cracks in them. Does anyone know what it means by coil "B". Does that mean a certain...

What's the difference between nitrous kits? I don't understand why a kit for the 5.0 can't be used on my 4.6 or the same for the LT1 or LS1 engines. The kits all spray nitrous. If they aren't hooked to the computer of the car, what does it matter to the car what the kit was made for? Is it...

OK, since I keep searching on the internet and the results keep coming back to the LVC (thanks Joey!), I'll ask the question here.....what kits are available out there for the 4.6L (I'm thinking a dry kit but I'll take other opinions), what's the differences and what is the best bang for your buck?

What year Cobra IRS fits the Mark. The guys over at GMvsFord don't believe me that they are a direct swap. Maybe I confused them because I keep saying IRS when I just mean the diff/pumpkin.

Jim's '94 Mark is throwing the following codes 18 - loss of ignition Monitor input 34 - egr position high voltage 39 - transaxle prob, no TC lockup 51 - coolant temp circuit 53 - TPS circuit failure 63 - TPS circuit failure 89 - lockup solenoid circuit failure 95 - Thermactor air system prob...