Search results for query: *

Hey guys, I have my old cat from an 04 ls 3.0 l pass side. Any clue a good place to resell it for scrap and make some money? Any clue what you might get? i did some research online and seemed like around 50 bucks might be a good deal. Wasn't sure if you guys had any preferred groups you...

Rainjacks, wondering if you were going to upload your pictures for us to view - good for someone like me who isn't mechanically inclined

Does anyone have images of the clip replacement or is it basically the same as the images from the regulator replacement, you simple have to disconnect the clip instead?

I bought motorcraft parts and spark plugs

I replaced all of the coils and plugs. Are you saying COP #4 usually causes this? I have a v6 so that would be the plug closet to me on the right. Since I have replaced all of that - what should I do to go about fixing this code? Replace all of those, or start with what one first?

So I just had the following codes come up on my car: P2104 - Throttle Actuator Control System P0223 - Throttle Position Sensor/APP (Accel. Pedal) P0122 - Throttle Position Sensor Not sure what the difference is with the last two but here is my question: Should I replace all of these parts or...

Also, would a bad catalytic converter have anything to do with this?

Thanks. do you know where the MAF sensor is exactly? I know this sounds dumb, but I tried finding it on ford parts to get a description since I am not really a mechanic. Thanks a lot!

its like it is hesitating, basically if i get up to 25 or 40 or 60 and go to floor it, it feels like it is not responding for a couple seconds because it is liked bogged down. You can basically feel that the car knows you are pushing down the pedal, but it just holds off like it isn't getting...

its like it is hesitating, basically if i get up to 25 or 40 or 60 and go to floor it, it feels like it is not responding for a couple seconds because it is liked bogged down. You can basically feel that the car knows you are pushing down the pedal, but it just holds off like it isn't getting...

Yeah I have a luxury version. THe RPM's dont go up at all until the car actually takes off. If it was a transmission problem wouldn't the rpm's go up? Again, I don't know a whole lot but I figured someone on here would know what i was talking about

This is going to make me sound retarded but SST?

Hi guys, I have read different articles that pertain to the gas pedal not responding quick enough when you push the gas all the way down. I know this can be as easy as a fix as just looking at the little wires that touch the carbon sensor which tell your car to go... The issue my car is...

My apologies Mechanicboy - I went to the bottom link and not the top link. So then do o2 sensors after the catalytic converter effect gas mileage, or is that the o2 sensor that regulates temperature and what not? I am only saying this because my MPG is very low for an 06' only 13 mpg in the...

Is it the 02 sensor by the catalytic converter or is it one that is in the engine?

Again - Novice here - I had the code: P0420 come up on mine. I believe this is the passanger side Cat correct? Should I check the wiring/sensor before messing with the cat then? Any easy/simple way to do this or will I need some sensor test equipment? Thanks in advance

I just went and purchased some foam material from the dealer (actually it was free). Made my own gasket that I wrapped around the outside of the piece you saw in the above picture. I then found out that my gasket underneath the hood/window cover called the cowl was damaged. Did the same thing...

Yeah PCV elbow is on the far right of the upper manifold told the back. You will see a hose that comes off the left side of your engine (when I say left I am regarding it as your left if you were looking at the engine) - but it comes of the left side of the manifold all the way to the back and...

I am looking more of how should i fix this? Should I just use a sealant/silicone on the gasket to seal it to the top, or completely replace the part? - I already changed my coils and such, just have to finish this before taking it out of the garage

Hey guys, After searching for about 20min for the thread that would address this issue, I had no luck - I remember seeing it about a week ago, but wasn't sure if it was on here or not. Basically below is a picture of the underpart to where my wiper arms attaches to my car. The rubber part...