Search results for query: *

So, got done replacing the blower motor control unit under the dash this evening, reconnect the battery and turn the car on to confirm the unit is working. When I do so, the drivers side light turns on but the passenger side light seems to flicker a little before not turning on. Any thoughts on...

As the title says, the blower motor in my 1996 Mark is not working. I put 12 volts directly to it and it started right up. It is also not the typical wire harness issues (I have had that issue before and fixed it by lengthening the wiring harness; wiggling the harness does nothing). Any idea...

Are they side specific?

The car has been up on jack stands for a few weeks while I rebuilt the rear suspension. Just before I put the car up on jack stands I started having a bad problem with the brakes. I got a hard pedal, could hear vacuum escaping in the passenger compartment and the engine would start loosing...

From what I read the recommending torque is something like 250 ft-lbs. My Torque wrench is sorely outmatch as it maxes out around 150. Can this be done without an impact wrench?

What is the right size to get? I have disassembled my rear suspension and foolishly threw away the old end links because I was planning on getting new end links. Now I need to know the proper size. Car has not been lowered.

any trick to getting the metal sleeve out? Or can you simply press the new bushings out of the new metal sleeve then press them in to the old sleeve on the control arm? I have the bushings from super coupe performance.

I am trying to remove the DS to replace the U-joints. I removed the 4 bolts at the differential and have lowered the gas tank. The DS is wedged between the differential and the tranny. I can't get it to drop down at all. Any suggestions on a safe way to do this without harming anything? I would...

Pressed out the rear hub in one of the knuckles and this is what I found (pics from my phone): There is a line where the inner race of the bearing is separated. It seems as if the portion of the hub closest to the tire was the only part ever making contact with the bearing. My question is; do...

is there any trick to getting these things off? I have soaked them in PB blaster for days and still can't get 'em. The torx bit seems to simply spin out and start to strip the torx head.

What would I need to rebuild the pumpkin? What would be a reasonable price on labor (assuming I remove the unit)? What would be involved in adding a LSD? What is the difference between an LSD and trac-loc (if any)?

Any brand/model recommendations? I am not lookin for great handling as much as comfort. The mounts are shot to. Should I use the bushings with the shock or by aftermarket? Any recommendations?

Where can I get them? Would T-bird ones work? I called super coupe performance and asked about the ones they have for T-birds and cougars. The only reason they don't list them for the Mark VIII is that they haven't confirmed weather or not they will work. Is there something unique about our...

I have a 1996 Mark (Gen 1). Recently the parking brake light (on the message center) has been coming on when I turn (either way) when I brake reasonably hard, or accelerate reasonable hard. Obviously, this is happening when the parking brake is NOT engaged as well. It seems something is loose to...

I am installing a Viper alarm with remote start in my 1996. The wire printout from DEI says for the tachometer wire, "tan/stripe" and that it is at the ignition coil. Which ignition coil? and what color of stripe? anyone had this problem? know what wire to use? each coil has a wire that can...

I have a 1996 Mark that I am about to install a Viper alarm in. I can't find in any of the printouts from the alarm company which wire to tap for the rear defroster. Anyone know what wire this is? Where it is located? polarity? etc? Thanks...

I have a 1996 Mark that I added the factory HID kit (new) to not quite two years ago (with about a 9-10 month window where the car wasn't driven at all). I installed them per the online tech articles; additional relays, splice in high and low beam wires in steering column, etc. Now the passenger...

Is it possible to put a 2nd gen center console into a 1st gen? What would be invoved? Would you have to change the shifter? what about swapping out the dash cover?

Is there any way to remove the driveshaft and replace it with a new one (denny's) without draining the gas tank?

My rear suspension has been dropping slowly. When I go out in the morning, the rear is dropped. Start the car, it inflates the rear bags and raises the car. no problems driving, just morning start up. I got a pair of rear bags from American air. Installed and lowered car, turned air ride...