TheBigRedOne
Well-Known LVC Member
Can you still get those molded 90 degree vacuum lines from Lincoln or Ford? I want to buy the elbows and the tee new.
Gen 2 Vacuum Lines On Top of Intake
- Thread starter TheBigRedOne
- Start date
Frankencougie
Active LVC Member
Dorman has the Emission Tee (47072) as well as the 90's. They can be sourced at most parts stores.
-Scott
Yup, that Dorman Emission Tee is what you want. I am looking for the part number and details on the hoses, I found some generic hoses with a 90 degree, long enough (cut to fit), with right internal diameter to replace mine. There where in pretty bad shape, and the pictures below of what happens with straight hose and what it does to the tee show that isn't great either.
shows that 3/8 hose works:
You also could use a couple 90 degree barbed fittings, but that is just 4 more chances for it to leak or come apart.
shows that 3/8 hose works:
You also could use a couple 90 degree barbed fittings, but that is just 4 more chances for it to leak or come apart.
TheBigRedOne
Well-Known LVC Member
Can you get the little short pieces of tube that fit between the elbows and the tee? One of mine cracked when I tried to remove it from the elbow. They are about an inch long.
Yes, I am 99% sure they are 3/8s, I am not sure where to get a single, or less than 10, but something like http://www.dormanproducts.com/p-11636-493-046.aspx?origin=keyword