Recent content by slowmkviii

Yea many times. Easy job but for coils I like to stay Motorcraft If you need to do gaskets thats a bit more of a challenge just find a good write up Also check the gap on the plugs

Spark plug boots fail a lot and so do the gaskets keeping oil away from the plugs

Start with another car Keep all the clean parts for spares

Grab a used one

Did you use mercon v The accelerating on its own id blame the IAC valve Normally can be cleaned

I'm going to help marviiiedrea do this in the fall but until then search people doing it on there 94-04 mustangs

Installed wheels but not one pic I do not approve

Its not hard to replace and if you don't have the evtm it will be hard to track down electrical problems

If you just want it to drive try blue devil or steel seal

I personally think 3800 is a good place But thats just my opinion Kirk ran 5k with 500 at the wheels

At street machine nationals st paul

Put a add in the market place If you have Facebook go to mark viii marketplace look for Carlos or bruce

Not sure on the mustang one but a bad crankshaft position sensor or harness can prevent starting

Whats the question?

First this thread is supposed to be known wheels/tires that fit Second the tires are a bit short. 245/45/18 is the same as stock height. The wheels should work but make sure the hub bore isn't to small