Recent content by raiseyourdrive

My interior drivers side door handle will not open the door. I pulled the panels off and it appears the cable is not broke or otherwise not working. The mechanism on the handle itself appears in good working order. Any thoughts??? Much appreciated!

I am having the same problem although my door opens from the outside but not from the inside. I have removed the door panels and am looking at all the parts. The handle itself appears not to be broke. how do you know which part is broke??? the handle still moves the wire attached to the...

Still stuck on the last bolt behind the high pressure line...any advice would be greatly appreciated

Well, I got the high pressure line off by pulling the fan shroud up high enough to get my wrench on the nut. Now I am stuck with removing the pump. The bolts are in so tight I can't remove them. I am using a 10mm socket and even tried a ratcheting socket. My fear is that in QuickLS's posts...

Hello all, I am stuck half way through the hydraulic pump change! I have read the posts by others about not taking off the high pressure line on the pump but I can't get the bolt off the other end either! How did you guys get your 18mm around the nut??? There is no space for a wrench...

pic's of the fuel pump (s)

Ok folks I need some help. If some of you have read my other posts you know I have been battling a cold start issue for the past several weeks. Here is what the car is doing: Won't start on cold days after sitting for a couple of hours. I have to turn the key on and off and crank the car...

I have checked a couple of parts websites and I haven't found a fuel pump relay...any suggestions???

How would I test the fuel pump relay??? Diagram? Which relay is it?

pictures are from this weekend when I changed the CTS. I changed the fuel filter last year.

I have had a problem with cold starts lately. I turn the key and I can't hear the fuel pump kick on. So, I changed the Water coolant temp sensor (for the warm start default) thinking that was it...Thanks to QuickLs for the diagram. Still nothing. Tonight I cleaned the MAF sensor but it...

Have any of you guys replaced your compressor? I replaced mine this weekend and can't get the compressor to kick on. No leaks 55lbs on the low side same of the High.

what did you end up doing?

I hate to hijack this thread but have any of you actually changed your own compressor? I changed mine this weekend...bearing was shot in the old one...no leaks and 55lbs on the low pressure side...can't get the darn thing to kick on now!!! Are there any tricks I might be missing?

Quick, I read your post. After seeing the cht sensor from your post and looking at what I purchased at oreilley I am pretty sure we are talking about the same thing...its just that I don't know what I am talking about:D . Back to your post...How much of a pain is it to remove the intake...