Recent content by Maroon8

New progress. for anyone going to try swapping for the updated gears, don’t buy anything doorman made as they updated the design with less gears, I was unable to find a 97+ mark 8 near me so was unable to try it. Out of curiosity I found the original actuator off an older model superduty has...

Thanks for the help, I ended up pulling the dash back to test the connector and it seemed to work out, Now the actuator is pulled and found the gear is stripped (the one against the motor). I know they no longer make the part and have read the gear also comes in the newer models so I have one of...

I’ve gotten my service manual, the motor turns both directions with the jumped pins but doesn’t stop, is that normal? also test B4, is this testing the EATC itself or is this the connector on it? Lastly B6 says the actuator connector is accessible but I’m having trouble finding it, does anyone...

Perfect, I didn’t think there was much of a difference between the 96. Do you have any recommendations where to get the service manual from?

I feel bad for posting about this when there's so many open posts but I'm new here and can't seem to find anything outside of 97-98 years, I've done the test on the HVAC unit (can't remember name for it) and it came up with code 2 for the blend door though I can here the motor turning during the...