Recent content by Gerald Moore

Reverse went back out. 3rd slips and codes p0020 and p0010. I just replaced them. This car going to the junkyard.

This sucks.

I know I have to go to my buddies shop and get them. So what will cause the reverse and drive to work again?

So now the reverse and drive is working again. I was driving around the block, the car in sst 3rd and the transmission shifted hard check transmission came on no codes. Got in the driveway and d4,d5 and reverse works but wont shift in second gear. Should I just get rid of the car. It has 216,000...

Well it first the pcm relays were corroded causing issues. Fixed that the reverse and auto went out on the transmission. Randomly start working got the other problems popping up. I am done with it. All this with in a few months.

It's the transmission that's causing everything. Time to replace it or get a different car.

I might just attack the coils, check my battery and clean the throttlebody.

The codes i get when the epb acts up is p0010 p0020 p2106 after turning the car off and on the codes go away.

Yeah anytime epb come on the transmission, cam actuator act odd.

So the epb will cause the transmission to act weird?

So right before I replaced my transmission the car worked reverse and auto for a day. So after checking codes I got p0010 and p0020 for the actuators. Fixed them the codes returned loss reverse. Then etc safe mode, electric parking brake and actuator codes return but goes in reverse. Is the pcm...

I am getting a p0010 code in transmission codes...why is that?

Update. I replaced the filter and it does not slip anymore. The gasket was blown and reverse servo piston seized up a bit. Got it on order so that will be the next thing to attack.

So I tried the adaptive transmission reset and the car actually went in reverse and d4-d5. After a while it went back to losing them and driving in sst mode. I am getting a trans for it. But before that should I clean the value body I know it has to have dirt in it.

Genesis might not be a bad idea.