Recent content by gadget73

Hi all This time we're going to throw a wrench into the works and have a different kind of meet. Some folks from GMN that live in the DC area are going to be in town, so we're gonna make this an afternoon/evening working meet. The location is the base for Scott's Automotive, located at 35 n...

Its that time again. This time the meet is in a different location Saturday April 8 9:00 am - noon Old Country Buffet 1325 New Churchman Rd Newark, DE 19713 (302) 738-2292 My apologies for the late post. I've been kinda busy with a lot of things, and finally had the time to hammer out a...

It was taken by those sadistic people who come up with all these new horrible fad diets. Laughing one's ass off would put them out of business. Oh, and I should mention the meet starts at 9am and runs till around noon.

Hi all The next SEPA meet will be on March 25 Springfield Park 825 Baltimore Pike Springfield, PA 19064 See you there!

aircooled VW generators also needed that light to make the regulator function. Mine was burned out and I replaced the generator ($100) and the regulator ($45) only to have my uncle tell me that the circuit depended on a $0.50 light bulb, and sure enough it was bad. I was not happy.

You know you're in too deep when you notice things like that. I have to admit tho, I'm the same way but with Townies.

Strange. I just pulled one of my rear motors and it literally fell off when that last screw came out. Might be the gears are jammed. Try picking up the glass a little to see if it'll come un-bound.

I want that 86 HO plate. I seem to remember looking at the auction and thought the power claims were way over-inflated based on the list of mods, but it could be another car I'm thinking of.

Look on the insode of the door that is in front of the motor. There are three dimples. Drill those out with a 1/2" drill bit and you can pull the 3 screws holding the window motor. They are 5/16".

Salem County, but I drive a Towncar, not an VIII.

No. You're just using the gears. I'd also reccomend installing a trac-loc unit with the new gears so you get traction on both tires instead of just one. Towncar should be a 28 spline unit.

Can you hear the motor running at all? If not, check and see that you have power at the connector for the motor itself. If you have power there and the motor still doesn't run, its probably shot. To get the window up, try tapping the motor lightly with a hammer or something similar. It might...

AOD is an AOD, so yes, VII parts work just fine. Tailshaft length is different, but the guts are all the same. One popular mod for the AOD is to install the Mustang high speed governer in the trans, but that only helps if your engine makes power at that RPM, which a stock lopo engine does not.

Short answer: there are none. A better answer: swap in an HO engine and you'll have the entire world of Mustang performance parts to choose from. Besides, its really fun cranking by people in a stodgy box Towncar with an HO powerplant. I have one, so I know :)

I would so love to have one of those, Tudoors rock!