mossbergman
Dedicated LVC Member
what size are the circled pipes?
'nother noob question
- Thread starter mossbergman
- Start date
DLF
Dedicated LVC Member
That pic looks familiar....
mossbergman
Dedicated LVC Member
i borrowed it
mossbergman
Dedicated LVC Member
alright i just put the car on a set of ramps and measured. for those interested its a 2.5 pipe (both sides)
Right on the Mark
Dedicated LVC Member
I'm going to add to this with Gen1 pipe dia's. I just checked mine and they come out to 2 1/4 biggest. They neck downs right after cats goes down to 1.900 OD!!
mossbergman
Dedicated LVC Member
after the cat on the gen 2 is 2 inch pipe :O
Right on the Mark
Dedicated LVC Member
As cat you mean the first 2 cats? Thats what I mean in my #'s.
mossbergman
Dedicated LVC Member
i guess there is more than one cat :lol:. the 2" number is after the third cat
Right on the Mark
Dedicated LVC Member
Do you have factory dual exh?
mossbergman
Dedicated LVC Member
i have the factory 3rd cat, and 2.5 ran back from that. i had the 2.5 done in preparation for this http://www.mandrelexhaustsystems.co...NCOLN-fdsh-MERCURY-RETROFIT-X-dsh-PIPE/Detail
Right on the Mark
Dedicated LVC Member
What I'm trying to get out of you are 1) do you have stock or did you have stock dual exh? 2) do you still have the front 2 cats? and 3 let you know the bottle neck rule. If up front it necks down to 1.90OD putting larger pipes after it will not do much.
mossbergman
Dedicated LVC Member
1. i had stock lsc duals
2. yes
3. on my car with that x on the above post it will be 2.5 from the manifolds/cats all the way to the tips
2. yes
3. on my car with that x on the above post it will be 2.5 from the manifolds/cats all the way to the tips
Right on the Mark
Dedicated LVC Member
Ok cool from your 1st post I thought you where keeping those front pipes.