Those who have bought the Mandrel bent exhaust systems kit, please look

[Stangman]

Hey guys,

I have a chance to get some magnaflow mufflers for a good deal. They are offset in/center out.

I plan to get the mandrel exhaust kit off the internet, but was wondering how far outwards the tailpipes go. I am hoping I can run an offset inlet without any modifications or trying to move the mufflers all over. I can get these magnaflows for 40 bucks. I plan to get the x pipe off ebay, and the mandrel kit after christmas. I'll also be doing the cobra manifolds and steering shaft mod.

How many of you have had good luck from their exhaust kit?

 

[95mark8newyork]

you getting it from mandrelexhaustsystems.com ?? i called them up several times and emailed, they have great customer service.. im planning on getting my 3rd cat removed, putting an x-pipe in, and then their true dual exhaust kit for our marks, and keeping my flowmaster 40s, if they fit. i might have to get 2.5'' flow 40s

 

[Stangman]

Yep, that's the place.

 

[Right on the Mark]

You can check it all out in my thread if you want.
http://www.lincolnvscadillac.com/showthread.php?t=73911

 

[mark8madness]

You can check it all out in my thread if you want.
http://www.lincolnvscadillac.com/showthread.php?t=73911

dude......thats was awesome came home from a 12hr work day and sat in dirty construction work clothes going threw post lol one of my favs so far

 

[Stangman]

You can check it all out in my thread if you want.
http://www.lincolnvscadillac.com/showthread.php?t=73911

Thanks!!! I didn't see the last few pages.... that is pretty much everything I need to know!

How much room on either side of the tailpipes do you have? The mufflers I might get are offset in/center out. I see you used offset/offset. I am hoping I can line up my tips RIGHT in the center of the factory tailpipe cutouts on my other bumpercover I plan to put on.

 

[Right on the Mark]

dude......thats was awesome came home from a 12hr work day and sat in dirty construction work clothes going threw post lol one of my favs so far

Glad you liked it, it was pretty fun to do. Plus bonus of killing the Goat.

 

[Right on the Mark]

Thanks!!! I didn't see the last few pages.... that is pretty much everything I need to know!

How much room on either side of the tailpipes do you have? The mufflers I might get are offset in/center out. I see you used offset/offset. I am hoping I can line up my tips RIGHT in the center of the factory tailpipe cutouts on my other bumpercover I plan to put on.

I just went out and measured the center to center distance of my tips and it came out to roughly 38 inches. Now you can measure your openings and see. I have no cutouts at all in my 1993 bumper so nothing to aim for.

 

[Stangman]

I just went out and measured the center to center distance of my tips and it came out to roughly 38 inches. Now you can measure your openings and see. I have no cutouts at all in my 1993 bumper so nothing to aim for.

I actually meant from muffler to body on the outsides under the car to make sure the mufflers will fit in place but that also gives me a number to go off of. I have some measuring and guesstimating to do myself as well since my '95 bumper isn't on my '93 yet lol