Junkyard Visit.. Who Needs What?????

RollinLS

RollinLS

Dedicated LVC Member
Joined
Jul 4, 2005
Messages
4,775
Reaction score
151
Location
TBA
I plan to hit the junkyard. If anyone needs or wants a certain part, let me know. I will try to find it and get the price. You cover shipping too.

For anyone wanting to do the 2000 center console upgrade. Let me know what color you need.

BTW I have enough free time this week to make more then one trip/visit.
 
RollinLS said:
I plan to hit the junkyard. If anyone needs or wants a certain part, let me know. I will try to find it and get the price. You cover shipping too.

For anyone wanting to do the 2000 center console upgrade. Let me know what color you need.

BTW I have enough free time this week to make more then one trip/visit.
Click to expand...

What are the chances in you tracking down one of the right hand triangular dash vents in black for a 2002 lse?
 
One of those chrome pieces that are on each of the vents please. I think they are the same size.
 
dannoltie said:
What are the chances in you tracking down one of the right hand triangular dash vents in black for a 2002 lse?
Click to expand...

Black??? I will look for you.:) I wouldn't think it would cost more then $5.
 
M4rk said:
One of those chrome pieces that are on each of the vents please. I think they are the same size.
Click to expand...

You know how to remove them without breaking them? Post insturctions. I will get as many as you need.
 
FALECF4 said:
Gen2 grille?!!!
Click to expand...

That will be a tough one. Almost every LS I find. The entire front clip is gone. Or the front bumper and hood are gone. I will look for you. What are you looking to spend?
 
As little as possible! If it's more than $50 don't bother. I was only going to use it so I can fab my own but I think I can pull it off with my gen1. I also need one of those chrome pieces if there is enough to go around. I am surprised you have LS's to choose from because around here there are zero in the junkyards! How about the mirror shrouds for each side, that I can use!
 
Rollin! Lol I'm in need of the bushing from the subframe it's a 16or 18 mm bolt. Just got word from another member of his replacement that went well. I will PM you a message with more detail. For anyone that might have LS's near them that are in scrap I am asking for your help also. I've been dealing with this issue for a year and finally got a solution, if I don't find one I will have to make shift one with steel plates. Thanks for your time guys.

http://www.lincolnvscadillac.com/showthread.php?t=64009
 
Maybe grab me a bunch of coils? I wouldn't mind stocking up on a bunch. Even if you pull them from the left bank that shouldn't take long
 
I could use the center vent surround that the vent sit in. Mine is a 02, black and has the buttons for info center. I never realized they came also without the buttons until I ordered one in the past and found out.

Anyway, danm droplight was leaning on mine and deformed it, I hate them old style drop lights, they get hot as a mofo.
 
Would appreciate a set of shock tower covers, el patron.
 
Last edited:
RollinLS said:
Black??? I will look for you.:) I wouldn't think it would cost more then $5.
Click to expand...

I need one of those also in black for a gen2. It kept flying out of the hole, so I glued it in. When there was too much glue I tried to pry out the vent piece with a knife and broke it.

get-attachment-1.gif


I couldn't roll down the passenger side window in fear that the thing would fly out.
 
I need the passanger side AC vent. My dash is brown. I also need a passanger side sun visor if it is in perfect condition. Also driver's side A pillar if it is in perfect condition. I am missing the.... Never mind I will take pictures of what I need. There are no junk yards down here, and some of the pieces I buy on ebay I get ripped off on their condition.
 
I need the triangle dash vent. Drivers side. Parchment interior.

Also if you run into a gen 2, the sill plates. All 4. I can't imagine they'd be much at a u pick.
 
Wow, you have a nice list pilling up. Do you know that there are any ls'es there? gen1, gen2?
 
let me know if there are any 2nd gen center console lids from the hinge up, any color, i just need the latch internals that holds it down. thank you
 
diskfunktional said:
Maybe grab me a bunch of coils? I wouldn't mind stocking up on a bunch. Even if you pull them from the left bank that shouldn't take long
Click to expand...

Otherwise I'll be doing my whole set in a month or two. I'm going to replace them all just for consistency and have some of the others as extras.

NickT88LSC said:
I could use the center vent surround that the vent sit in. Mine is a 02, black and has the buttons for info center. I never realized they came also without the buttons until I ordered one in the past and found out.

Anyway, danm droplight was leaning on mine and deformed it, I hate them old style drop lights, they get hot as a mofo.
Click to expand...

Dude, LED drop light.....get with the times! ;)

scjmc said:
I need the passanger side AC vent. My dash is brown. I also need a passanger side sun visor if it is in perfect condition. Also driver's side A pillar if it is in perfect condition. I am missing the.... Never mind I will take pictures of what I need. There are no junk yards down here, and some of the pieces I buy on ebay I get ripped off on their condition.
Click to expand...

I may have a visor sitting around that I could ship out. At least my buddy told me he still has some of my old parts sitting around from my last LS. Grey interior.
 
gen 1 front valance. Like you said most front ends are completely gone but if you see one.
 
Cmack, I have mine I took off once I got the mach1 spoiler. You can have it if you want it.. Just PM me
 
if you can pry off the plastic seat cover on the backside the seat with out breaking the clips (mine broke and doesnt attack properly and is held in there by my seat cover). Need in black.
thanks for lookin for all of us
 
RollinLS said:
You know how to remove them without breaking them? Post insturctions. I will get as many as you need.
Click to expand...

A pick tool. Just be certain to block with your hand so that it doesn't go flying off into the unknown. I took one off of a Thunderbird this way.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 88 (members: 0, guests: 88)
Back
Top