front dusk shield

[oldhead]

My front dust shield is loose and rattling. Are they held on by bolts or rivets.

thanks

 

[1LoudLS]

the shield in the front just behind the bumper at the very bottom? then bolts, if somewhere else then i'm not sure

 

[oldhead]

The dust shield behind the disk brakes. One of mines is loose and I may have lost a bolt or rivet. Can anyone tell me which it is bolt(size) or rivet.

 

[joegr]

I always thought that the headlights were the "dusk" shields. Anyway...

The gen II disk brake dust shield is attached with three rivets. I don't know if gen I is the same, but Ford usually uses rivets. The link below is the exploded view.
http://deneau.info/ls/s6x~us~en~file=s6x63004.htm~gen~ref.htm

 

[1LoudLS]

brake dust shields, wow, i was way off.

 

[oldhead]

I always thought that the headlights were the "dusk" shields. Anyway...

The gen II disk brake dust shield is attached with three rivets. I don't know if gen I is the same, but Ford usually uses rivets. The link below is the exploded view.
http://deneau.info/ls/s6x~us~en~file=s6x63004.htm~gen~ref.htm

I thought they may be rivets.
thanks