My parts pile for my gen 2 mark

Silver06S281

Active LVC Member
Joined
Oct 13, 2013
Messages
166
Reaction score
2
Location
PA,poconos
Been buying and accumulating parts to build a badass mark viii for both corning and the occasional 1/4 pass. Figured id share a pic i took acouple weeks ago, Im gonna start a build thread soon as i recently got rid of my 93 and bought a clean 97 from the original owner. I'll be installing all these parts as soon as the weather starts warming up here in the mountains.
unnamed.jpg
Not pictured but also have is
Tokico blues for front
03-04 cobra bilsteins
Addco 1 1/4 rear sway bar w greasable bushings
94-97 cobra rims
2.5 mandrel bent exhaust
93 one piece drive shaft
rear 03-04 cobra drilled and slotted rotors

unnamed.jpg
 
I like that Magnaflow 2 into 2 muffler to replace the 3rd cat. I would run that muffler and straight pipes out back, will sound bad ass and not too loud...
 
my car is running the tokico front, bilstein rear shock combo on tokico drop springs with LSC sway bars.
it seems to be a very capable setup. the vogtlands and addcos should make for a very fun car.
 
What rating is that B&M trans cooler? I'm looking into buying one for my 98 soon.
 

Members online

Back
Top