Dino'sLSdeuce
Active LVC Member
I got the "HIPPY HIPPY SHAKES"....
I got on the freeway one afternoon and drove for about 30 miles, exited the freeway and stopped
at a burger joint (for about 7 minutes). When I got back on the freeway and tried accelerating
around past +40mph my car was like "hyper-ventilating" + the Traction Control Light was blinking ??
I pulled over and the blinking stopped. It seemed normal again. But as soon as I noticed that when
I rev'd the RPM's higher than +2,000 I'd start geting that "jerky" engine feedback w/ the blinking Traction light.
Any ideas ??
Also, it may be related but I did have a P0420 - Catalyst system efficiency below Threshold (Bank 1)
light up 2 weeks prior. But, the CEL cancelled itself out about 4-5 days later. Other than that...drives
like normal whether it's in the city (stop and go traffic), at start up, or at idle...no problem what-so-ever.
Only if I try to take it past +40mph, I notice the Jerky feedback.
No Codes popping up in my INNOVA 3130 scanner...??
Thought I'd run it by "THE WISE ONE'S" here at LVC.com before I take somewhere for some news
that "may" or "may not" be the problem...
Thanks fellas for your time (reading) and your input...
I got on the freeway one afternoon and drove for about 30 miles, exited the freeway and stopped
at a burger joint (for about 7 minutes). When I got back on the freeway and tried accelerating
around past +40mph my car was like "hyper-ventilating" + the Traction Control Light was blinking ??
I pulled over and the blinking stopped. It seemed normal again. But as soon as I noticed that when
I rev'd the RPM's higher than +2,000 I'd start geting that "jerky" engine feedback w/ the blinking Traction light.
Any ideas ??
Also, it may be related but I did have a P0420 - Catalyst system efficiency below Threshold (Bank 1)
light up 2 weeks prior. But, the CEL cancelled itself out about 4-5 days later. Other than that...drives
like normal whether it's in the city (stop and go traffic), at start up, or at idle...no problem what-so-ever.
Only if I try to take it past +40mph, I notice the Jerky feedback.
No Codes popping up in my INNOVA 3130 scanner...??
Thought I'd run it by "THE WISE ONE'S" here at LVC.com before I take somewhere for some news
that "may" or "may not" be the problem...
Thanks fellas for your time (reading) and your input...