what is this?? white powder on my coil plug end???

04turbostang

LVC Member
Joined
Oct 12, 2011
Messages
10
Reaction score
0
Location
gettysburg
hey guys engine light came on today misfire cylinder 2. i pulled coil and this was on the end of it. theres no oil in plug hole. did my coil burn up???



photo6xso.jpg


photo8cj.jpg


photo7a.jpg
 
i think i found it out spark plug is all jacked up, im going throw new pugs in her as well, even though even plugs are only 7,000 miles old, but plug looks defective now.
 
My assumption is corrosion, I get it all the time and believe its from water getting in there.
 
fixed the bucking/ sputtering!!!! thank the lord!!!

its even worse in person, plug is completely shot!!!!!!!!!!

photo9yl.jpg
 
What kind of plug is that? I wouldnt use any other plug other than the motorcraft fine point platinum. Definately dont use copper on a factory/un-modded engine. They wont last as long and the fuel economy will drop. I have heard the E3's are ok too. And it looks like the threads on the plug have oil on them.
 

Members online

No members online now.
Back
Top