Want to install cobra intake on my 95 LSC

[rcoderick3501]

Hi,
Would want to install 96 cobra intake on my 95 LSC (AKA THE HEADHUNTER). We are installing a new stroker. What parts are necessary to do this? Is there a drive by wire kit that I could possibly use. Thanks for any help. Rick

 

[chris2523]

All kinds of custom stuff. And it wont fit under the hood.
Not major problems though. Lincolns of Distinction has 1 or more good write ups on cobra intake swaps. LVC probably does as well.

 

[unity]

Why? I thought only the Gen II benefited from such a swap. The Gen I intake really works well. IMHO, more money and time can be put into exhaust. The cars breathe really well, they just can get it out quick enough.

 

[chris2523]

the 1st gen will still benefit in the high rpm range, just not nearly as much as a 2nd gen would.

 

[Sapperfire]

Getting it to fit under a Gen1 hood is the tricky part. Youll need a cowl hood or space the sub frame and get an alignment

You'll need to modify the fuel lines, and you'll need a Cobra fuel rail, because the Marks FPR sits under where the Cobra EGR flange is, there's not enough room.
you'll also need to relocate the Cruise Control module and make a custom bracket for both cables.