Routing Air Suspension lines...

Stack

Dedicated LVC Member
Joined
Aug 23, 2005
Messages
1,541
Reaction score
3
Location
Mad-Town
If one were to gut the system and go to a full reserve system with an extra tank... where would one route the lines? Drill into the frame rail? What would you want the lines to stay away from?
 
I would just run them inside, along the primary compartment harness. Its where I ran my audio lines.

Just remove the inner kick panel screw, remove it and pull back the carpet and there is a MASSIE channel to run cables, lines, all sorts of stuff :)
 

Members online

No members online now.
Back
Top