quick air ride question

[zmt325]

I need to know how to properly vent the front bags on a 95 mark. I left my computer at home and am stuck at the shop with only my phone. Searching sucks with the phone.


Please help.
It has brand spanking new arnott bags I sure as hell can't afford to :q:q:q:q anything up.

 

[Right on the Mark]

I need to know how to properly vent the front bags on a 95 mark. I left my computer at home and am stuck at the shop with only my phone. Searching sucks with the phone.


Please help.
It has brand spanking new arnott bags I sure as hell can't afford to :q:q:q:q anything up.

I just have 2 wires with female pin ends on then. I take elec connector off solonoid put these 2 wires on pins on soloniod and put 12V to them.( i just cut elec soloniod connector/wire off my parts car to do this easier.)

 

[zmt325]

I just have 2 wires with female pin ends on then. I take elec connector off solonoid put these 2 wires on pins on soloniod and put 12V to them.( i just cut elec soloniod connector/wire off my parts car to do this easier.)

Is there not an easier way. I sure don't want to unnecessaraly splice into the harness. I thought you could just pull the solonoid like a half a turn and they would vent? But I don't know that is why I am asking

(i hate my phone)

 

[keatonsdad]

Yes just pull the solenoid and it will vent.

 

[Right on the Mark]

Is there not an easier way. I sure don't want to unnecessaraly splice into the harness. I thought you could just pull the solonoid like a half a turn and they would vent? But I don't know that is why I am asking

(i hate my phone)

No splicing I just make wires that plug into the soloniod. I don't like to mess with removing solonoids with full pressure in bag and messing with the soloniod o'rings. Would have to pull the air line too. When you pull niod let me know how it blows down.

 

[keatonsdad]

No you don't have to mess with the air line the air come from the area where the solenoid is its real simple it will vent in about 3 seconds. I keep spare o rings in my box.

 

[zmt325]

Thanks guys turned it 1/4 turn and it rapidly vented

 

[Right on the Mark]

Cool good to know.