Not again!!!!!!!

[invisiblem0nst3r]

as some of you might remember i replace the oil filter housing gasket a few months back.... well im pretty sure its leaking again so im gonna have to replace it again!!!!!!!! does anyone have the bolts that attach it to the block? or know where i can buy them i kinda stripped them out last time i did it

 

[Sapperfire]

If you've stripped those bolts, then more than likely you've stripped the threads in the block, they are aluminum..helicoil time baby!

 

[invisiblem0nst3r]

im talkin bout the heads of the bolts cuz i couldnt get a good angle on one of them

 

[Sapperfire]

Most hardware stores carry bolts....

 

[invisiblem0nst3r]

ok i was just thinking maybe i had to get these specific one

 

[Sapperfire]

Just take a bolt with you..not sure where you are, but here in Texas we have Fastenal, that place has thousands of different bolts and nuts,
as long as the length,thread style and diam are the same, you're good, you can even use a different head style,

or you can go to a salvage yard, grab another one, most yards don't charge for bolts

 

[DLF]

If you really end up needing the stock bolts, I have a set.