Magnaflow exhaust on LSE?

[Lincoln Luebbe]

2002 LSE, all I see for the Magnaflow system is the turned down exhaust w/o bumper cutouts option. For everyone who has an LSE 2002 style cutout bumper, is there a different part number than 15710 magnaflow system? Or does the shop have to modify the the tips? I was thinking about using my stock tips... Any help would be great.

 

[NYC LS8]

I'm not familiar with how the system is set-up, but as long as the rear mufflers are an offset/center design, you can re-use your tips or any other type of tip you want.

 

[02LSE96LSC91SE84TC]

I kept the stock LSE tips with the Magna-Flow system. Just cut the turn downs off and had to use some reducer pieces as the tips are 2" dia. and the system is 2 1/4", the tips don't fill the pipe tight. Thats the only system available.

 

[B-Lo]

I kept the stock LSE tips with the Magna-Flow system. Just cut the turn downs off and had to use some reducer pieces as the tips are 2" dia. and the system is 2 1/4", the tips don't fill the pipe tight. Thats the only system available.

same

 

[Lincoln Luebbe]

Thanks guys. I had never seen any other system offered. So I guess when I get around to it it will be the stock tips!

 

[GrayGhost1]

Magnaflow USE to offer a system for the LSE a long time ago but discontinued it because of demand. For the Magnaflow system to work on an LSE you will need to fabricate some "S" pipes to go from the muffler and exit the lower rear valance. I had my local muffler shop make them for me when I had my LSE. I highly recommend getting tips on the Magnaflow system. The down turn tips will cause a great deal of resonance inside the cabin. Putting tips on and extending the sound past the car will eliminate all of the resonance.

 

[bigpappy33]

Ken has some nice quad tips that are made by magnaflow on his site that are a little bigger and would fill up the space nicer if you want to upgrade...