iPod Adapter Install

[D NORO]

So I got an iPod adapter cable for my '03 Lincoln LS. Has an indash 6disk changer. I've never done anything like this before so I looked up some threads and the tech article on how to slide out the radio. Doesn't seem to complicated. Although the threads I found were for '00 - '02 models, not '03 and up. Any additional info you guys could give me would be great. Going to start my project tomorrow morning.

So far it seems pretty straight forward:

1. Remove the top vents.

2. Unplug the wires for the status/fuel buttons.

Two top bolts will be exposed.

Then the part I'm a little confused about due to the design variations between the 02 and 03 models:

3. Remove the ashtray and the surrounding trim? Exposing two bottom bolts?

Any tips would be great. Thanks gentlemen.

 

[Alax7]

Removal and Installation

Remove the floor console finish panel.
Pull upward from the front of the floor console finish panel to release the retainers.
Remove the 4 screws and the console ash tray assembly.
Disconnect the electrical connectors.
Remove the center register panel.
Disconnect the electrical connector.
Remove the 4 screws and the audio unit/dual automatic temperature control (DATC) assembly.
Disconnect the electrical connectors and the antenna cable.
Remove the 6 screws and the audio unit from the bracket.
To install, reverse the removal procedure

from

http://deneau.info/ls/

thanks to owlman

 

[M4rk]

You will have to pull the plastic off that extends around the shifter and ashtray. Simply pop it off starting at the tray.

 

[soccerplayer2007]

Taking pictures and doing a small write up/explanation of each step would be extremely helpful to those looking to do the same (like myself).

 

[1LoudLS]

Taking pictures and doing a small write up/explanation of each step would be extremely helpful to those looking to do the same (like myself).

i thought a couple of people have before. i'm pretty sure Pete did when he did his custom ipod dock

not too mention the like alex gave from the repair manual that has diagrams and instructions!