Markviiiedrea
Speed Bump
I'm not going to do it but I was wondering if it would be possible, can I put a mark 8 bolt pattern on my town car?
Hub swap feasibility
- Thread starter Markviiiedrea
- Start date
chicken
SHEOOOOOOOOT
you'd have to find sold 5x108 axles
97MarkJA
Dedicated LVC Member
kustomizingkid
Dedicated LVC Member
Are you :q:q:q:qing retarded??
97MarkJA
Dedicated LVC Member
Sometimes
Markviiiedrea
Speed Bump
Well I was just staring at the 2 cars last night and I was thinking how good are the octi stars would look on the town car.
kustomizingkid
Dedicated LVC Member
Silly.
baggedtaco
Well-Known LVC Member
The wheels are a CLOSED (Have hub cover) so just have a second (5-4.50) bolt pattern drilled in them. Will cost very little.
The TC hubs are 70.60MM and the Mark wheels have a 63.50MM and the wheels are bored as such. SO they would have to be bored.
The offset of the 16X7 TC wheel is +20MM
The offset of the 16X7 Mark Wheel is +38MM (Would fit but would tuck WAY in.)
Brad