Headlamp Fuse keeps blowing after an aftermarket HID install??

Lincoln_on20z

Active LVC Member
Joined
Oct 23, 2010
Messages
183
Reaction score
0
Location
Edgar County
Installed aftermarket HID's for Low Beams and Fog Lamps, the right front low beam fuse keeps blowing after headlamp switch is turned on...any thoughts? Thanks!
 
Just the obvious...

Your right ballast is defective or you have mis-wired it.
You could switch the right and left ballasts. If after this the left fuse blows instead of the right, your ballast is defective. If it's still the right fuse the blows, you have mis-wired somewhere.
 

Members online

No members online now.
Back
Top