Exhaust Drone??

johnboy89

Active LVC Member
Joined
Feb 26, 2008
Messages
134
Reaction score
0
Location
greene
I recently installed an exhaust system that I obtained from a car I parted out. It's 2 1/2" from the cat back with the third cat. and resonator removed. The mufflers seem to be a turbo type, don't recogonize the name. The car is not very loud, but it resonates in the cabin bad at times. I would like to get rid of that noise, but don't want to start experimenting with mufflers. I see other posts where the dynomax bullets, magnaflows have been used. Will these eliminate or would I have to re-install a resonator.??

Thanx:)
 
a x pipe or some other form of crossover is in order. LMS has a double x and thats what I would (and did) go with.
 
Last edited:
a x pipe or some other form of crossover is in order. LMS has a double x and thats what I would (and did) go with.

I should have mentioned in my original post, but it does have one X pipe installed, looks like one that was fabricated from exhaust tubing. The drone is not always there, seems to be worse with more people in the car.
 

Members online

No members online now.
Back
Top