Easy no start fix.

BLK98MK8LSC

LVC Member
Joined
Nov 25, 2007
Messages
15
Reaction score
0
Location
FAR NOR CAL
I had a no start today on my 98 lsc. Its been trouble free and i thought here we go. Checked the fuel pressure, and it was 40 pounds. Hummm. I thought crank sensor next and jacked it up for a look. I was looking at the ac compressor and turned to get out and noticed the oil pressure switch was in two pieces. Could it be this simple? HELL YES IT CAN. changed it and started right up. Its one more thing to check if any one uses the search function some time later on.
 
I also had a no-start issue but it was more intermittent than anything. In my case, it was the pigtail going to the crank sensor. I ordered a pigtail (two lengths of wire with connector) from the auto store.
 
My '97 has been acting up lately too. Turn the key and everything comes on, but it won't start. Won't turn over or anything. Then after a few turns, it starts. It only does it once in a while. I'm thinking it's the ignition lock cylinder. That's gonna be expensive...
 
My '97 has been acting up lately too. Turn the key and everything comes on, but it won't start. Won't turn over or anything. Then after a few turns, it starts. It only does it once in a while. I'm thinking it's the ignition lock cylinder. That's gonna be expensive...

that has to be in the key switch
 

Members online

Back
Top