CEL Help

[k9t8m]

Ive got a CEL and took it over to the service dept today for them to plug into it. I have a couple of codes, one of which has to do with a Vehicle Speed Sensor issue, and the other to do with a Torque Converter issue. I did just have the dash out last weekend for the heater core sway, my question is there a plug somewhere I forgot to plug in that could cause both of my issues? Does anyone know where the vehicle speed sensor plugs into near the dash? Thanks!

 

[DLF]

I looked in the wiring diagram, and couldn't find an obvious connector. I'd suggest looking at the connections under the left side of the dash near the PCM.

 

[rrudd2]

Did you happen to take the car thru an automatic car wash before you got the codes? I took my 97 thru one of those brushless automatic washes a few weeks ago, and water got up onto the transmission harness. I got a CEL and a couple of messages on the message center.

As soon as the car dried out, the messages and the CEL cleared up and haven't returned.

 

[k9t8m]

Did you happen to take the car thru an automatic car wash before you got the codes? I took my 97 thru one of those brushless automatic washes a few weeks ago, and water got up onto the transmission harness. I got a CEL and a couple of messages on the message center.

As soon as the car dried out, the messages and the CEL cleared up and haven't returned.

no. come to think of it i dont remember any of my marks going through an automatic wash.

Ill check the connections again, im sure i just missed something. I was trying to avoid having to tear the dash apart again, but it looks like I may have to.