best amp?

[djknowledge]

That's what they claim. I'm asking if the amp actually puts out that much.

For example, my Kenwood 9104d says on the box: 900rms x 1 @ 2 ohm. When tested, it only put out 644 or something like that. That 9104d also said it was capable of a 1 ohm load... a blatant lie. I don't know anyone who has been able to get one to run at 1 ohm without blowing a fuse.

if you know what the amp can really handle....and wire it correctly with enough battery power...it will play without blowing fuses. i have been playin my orion d2400 rated at 1200 rms at 1 ohm....at half on ohm for one year without even getting warm....i wired 2 dual 2 ohm subs to them...

 

[1LoudLS]

if you know what the amp can really handle....and wire it correctly with enough battery power...it will play without blowing fuses.

Not this particular amp, kenwood swears that it is 1 ohm stable, but no one has ever got it to work like that.

i definitely know what it can really handle, 2 ohm or higher only!

 

[Onefreshls]

trust me go with mmats they are the best little pricey but youll love it trust me

 

[BlackLS06]

Not this particular amp, kenwood swears that it is 1 ohm stable, but no one has ever got it to work like that.

i definitely know what it can really handle, 2 ohm or higher only!

I have that same amp, its badass at 4 ohms and 2ohms but i wouldint dare do 1ohms.

I think it puts out a bit over what its rated for at 4ohms....lol.

 

[pektel]

I have that same amp, its badass at 4 ohms and 2ohms but i wouldint dare do 1ohms.

I think it puts out a bit over what its rated for at 4ohms....lol.

But it doesn't do near rated @ 2 ohms... Wouldn't matter if you dared to try it or not... it won't work.

 

[BlackLS06]

But it doesn't do near rated @ 2 ohms... Wouldn't matter if you dared to try it or not... it won't work.

I know it wont.

It actually does a little over 600rms at 2ohms if i remember right. My system hits hard though, so im good for now. If i feel like im lacking, then ill just get two sdc 2.5's and an aq1200d for 1200rms of thump.

http://www.audioque.com/aq/?page_id=22

http://www.audioque.com/aq/?page_id=26

 

[pektel]

I have a Directed D2400 that does 1200rmsx1@1. Right now I only have it wired to a 2 ohm load (single Directed SX12D4 sub). I was going to buy a DC lvl4, but my custom strat just got finished, so I gotta shell out a good chunk for that:

specs:

Alder Body
Vintage Sunburst finish
Nico’s Vintage – American Voodoo ’69 pickups
V-to-C Neck Contour – a soft V at the nut fades to a thin C at the 12th fret
9.5″ Radius Rosewood Fretboard
6-Inline Headstock with Sperzel Locking Tuners
Trem King TK-1 Tremolo system

 

[1LoudLS]

But it doesn't do near rated @ 2 ohms... Wouldn't matter if you dared to try it or not... it won't work.

quoted for truth