As some of you know, my LS had side impact. I was able to clear most of the codes leaving me with code 37 which was for the passenger side seat airbag (which deployed.) Now its almost a year and today I decided to just wire in some resistors to simulate the airbag being present to get the light off. So I looked at my dash today and saw that code 37 is no longer being thrown, but instead 32 which is a code that I know wasn't there before.
To see that if I can somehow make code 37 pop up again, I disconnected the airbag connector under the seat. Still, only 32 pops up.
As far as I know, all codes are supposed to come up one after the other. I don't want to replace the clockspring for code 32 just yet, but I'm wondering what happened to code 37. Any ideas?
To see that if I can somehow make code 37 pop up again, I disconnected the airbag connector under the seat. Still, only 32 pops up.
As far as I know, all codes are supposed to come up one after the other. I don't want to replace the clockspring for code 32 just yet, but I'm wondering what happened to code 37. Any ideas?
