98 trans

[blklscmd]

im about to get a 98 trans i wanted to know what can i do to it until i finally put it in?I have a 97 lsc does somebody already sell the plate with the jmod already done to it?I already know i have to buy a 97 mlps and shift solenoid and repin the harness.Its just going to be sitting in my living room until the one in my 97 goes just want it to be ready to go and be the shiit.

 

[catmech]

since its in the living room you can put a piece of glass on the top of it. use it for the coffee table.

 

[htrdlincoln98]

I didnt do the jmod but the trans go kit and jmod are no big deal. Drilling the holes are simple. just follow the directions. Make sure th evalve body bolts go back in the right hole and tight. If you do a lot of wrenching you can do this.

 

[kustomizingkid]

Just do the JMOD yourself... it's pretty straight forward, DON'T use the TCCOA repin guide...

If you are really apprehensive about the JMOD you can get the predone part from Lonnie at BOC or Darrin at BC Automotive.