2000 V6 coil replacement

[IamEli]

Okay, so i am going to have to replace some coils and I have a couple questions for anyone that has done the replacement on a V6 before. I am wondering if you had to replace the Intake gasket after you took it off? I am getting 6 coils, new plugs and new valve cover gaskets. So i am pretty much doing a whole tune up, but I want to make sure that there are no misc. gaskets that I dont know about that I should make sure I have.
Thank you in advance for the help,
Elisha

 

[LincolnTech38]

upper intake gaskets and the gasket between the egr valve and intake manifold.

also inspect the pcv hoses at the back under the intake while it is off, might want to replace them while you are in there, they always crack.

Jay

 

[IamEli]

I did the work yesterday and it went great, took me 4 hours to do the vc gaskets, all the plugs and the coils. The car runs great, no more hesitation and no more wierd shifting from the trans. Thanks for the input and the help, if anyone else does this the write up in the tech. section is awesome.
Elisha