Search results for query: *

So, while bleeding the cooling system, the engine fill cap was not screwed on tight enough, so it was leaking. I was searching for the sound and when I realized it was the engine fill cap, I tapped it and it broke off some of the plastic piece that the cap screws onto. I need a new one of...

If you're looking at the bottle from the front of the car, there are two openings for a coolant hose. Which one gets the coolant hose, the one with the metal piece inside or rear one. Putting my car back together after months of it being down and I cam remember. Thanks.

I had previous issues regarding some damaged wires under the hod. Got that solved, (finally) but I now have two messages that I didn;t have previously. Firstm I have teh check advance trac message, although I believe that's due to a faulty wheel speed sensor on the front drivers hub. Any...

So I was driving down the interstate and had a blowout on the drivers side tire. No big deal right? Not so fast. Apparently, a piece of the tire ripped off the inner fender and RIPPED OUT MY WIRING HARNESS TO MY CRUISE CONTROL MODULE LOCATED IN THE INNER FENDER ( the black box with a cable...

I have a crack in my fuel tank and will be replacing it this weekend. Is there a write-up for this or is it fairly straight forward (ie bolts under backseat, drop mufflers, etc.)? Any help or experience is greatly appreciated. Also, where is the most common spot where a slight freon leak would...

Hello I did not start my LS for about 30 hours and my battery was dead. This happened about 3 weeks ago and thats when I replaced the battery. I used a DMM and got a 14.2 off of the battery while the car was running. I looked at the passenger and driver side battery connections at the...

I bought two LS key fob's off of ebay. I read somewhere that the 00-02 LS key fob's must be programmed by the dealer, rather than using the ignition programming sequence. Anyone know if that is true? Thanks!

Hello, I own a 2000 Lincoln Ls v8. I hear a grinding coming from the front pass. side under heavy braking. I have changed the wheel bearing assembly, as well as the brakes and rotors. I still get the noise. Any thoughts on my next troubleshooting step? Thanks. Also, it seems to be...