Search results

Problem solved, thanks for everyone's input.

The fuel pump didn't blow up just the fuse blew. I had the car towed the mile back to my house today and I'm going to dig into it in the morning. It's the #4 fuse in the kickpanel that keeps blowing. Owners manual says it's for "Cluster, PCM Relay, Fuel Pump Relay, REM, Transit...

What would that have to do with the fuel pump relay fuse blowing though?

I was on my way home from work and about a mile before my house my LS just died. I was still coasting and the lights and everything were still on but the engine was not running. I coasted to a safe place to pull over and tried to start it again and nothing. After poking around a little I...

this is very true, every speaker has different air space requirements, it's not really a blanket vol for a given size of the speaker. This is one of the free calculators I mentioned before. It's not very accurate.

www.partsexpress.com is a great place to order those from. I would suggest (2) 3" ports for your box.

The only free one I know of is WinISD but it's not something you can just download and start using right away, there is a lot that goes into using it the correct way. If you want to check it out go to www.linearteam.dk I use this along with Bass Box 6 Pro There are some other free basic...

When tuning a box you need to know the net vol of the enclosure and the freq you want it tuned to. You change the tuning by using different size/length "ports". Take my box as an example, it is 2.5ft^3 and my desired tuning was 33hz. I decide that a 4" round port was large enough so that I...

My box was only about 30" wide, I didn't use the space where it bumps up on the sides. Mine also got rid of the cover over the spare tire and I built a false floor to hold my amps, but it was easily removeable if you needed to access the spare or battery.

I'll have to dig them out from my old files. Box is 2.5ft^3 tuned to 33hz using a side firing 4" PSP Aeroport.

Well if were going to do that. One thing to keep in mind is that if you fire the subs to the rear and block the opening behind the rear seats and rear shelf you are blocking the bass from entering the cabin easily

Actually shipping a box isn't as bad as you might think. I ship several boxes a week through UPS. I've shipped boxes from NY to CA and many places in between. Largest box I shipped was 48x20x20 and weighed over 100lbs and it only cost me $96 from NY to the midwest. Also MDF or Birch ply...

The holes in the top will not just make it sound like poo but will cause some serious cancellation issues. You need to use the T/S specs of the subs to calculate the proper size enclosure and vent length for your desired tuning. with out this you are no better off then just setting the subs...

Well I checked all the fuses and one more was blown, I replaced it and now everything seems to be back to normal.

So I have been working on my stereo for the last two days and today when I was working I noticed that my drivers side headlight was on even with the car off. I messed around with it and for some reason the right high beam and left low beam fuses were blown, I replaced them and now both low...

I like them.

Eagle F1 GS-D3

Check out Mechman alts I have a 250 amp alt from them and it works great, also dyno sheet shows over 280 amps peak output.

Thanks guys. Anyone know a good place to buy a new stud? Will Autozone or Advance have them?

Tried searching and couldn't find anything so here goes. I broke a wheel stud on my passenger side rear. Can I replace just the stud or do I need to replace the whole hub? I would pull the wheel off and look for my self but it's pretty cold out so I figured I ask here and save my fingers...