Search results

So just to update I finally got it figured out I ended up having about 8 wires that were broken/corroded on my main harness that runs underneath the fender liner on the passenger side and then up through the bumper and underneath the passenger headlight and fuse box under the hood. The wires...

Alright well I guess I'll wait till my appointment at the dealer. In the mean time I'll just finish up some small interior issues and look around the forums for what might be causing the fuel data error issue. This just sucks because Iv put alot of work into the car to get it road worthy (new...

So I went out and messed with the car today checked all the fuses again they all were fine I'm not sure how to go about checking the relays otherwise I would check those as well. Im also not really sure what voltage I'm supposed to be getting out of the rest of the pins on the obd 2 I know that...

The scanner that works is a bosch obd 1050 and I'm using the bosch mobile scan software on android the other scanner that doesn't work is an innova 3100a im not sure what the emissions shop is using I'm not using any adapters I've also tried using them with key on engine off and key on engine on...

The tool didn't give any indication of an issue communicating with the pcm I could get live data, read codes it didn't seem to have any issues how would I go about verifying the wires from the connector to the pcm I know pin #16 had 12.5v and both pin #4 and 5 are both good grounds

The scan tool that worked was a bluetooth bosch scan tool I picked up from oreillys that reads ABS,SRS, and Engine DTCs. My Innova 3100a fails to communicate it doesn't read ABS or SRS though that's the only difference I can think of though, its same thing with the shops scan tools and Emissions...

I Have a 2000 Lincoln Ls with 140k miles on it I'm currently trying to get it to pass emissions but the emissions computers wont communicate with the obd2 port and several obd2 scanners wont communicate either iv managed to get one scanner to work but that's it. The car currently has an airbag...