Search results

  1. OU812IC

    Cobra Intake Help

    Those are my pics.... I don’t even have them. Lol
  2. OU812IC

    Coolant tube mods

    Never came through... I sent a message to you as well. There are a bunch but one came up we had 7 people on common. Hahaha
  3. OU812IC

    Coolant tube mods

    I have done it as well as the head cooling mod. I used the ON3 performance kit. To do it again... Go to eBay and search 4.6 HCM or crossover delete and you should get the fittings that go in the heads for $30 a piece or so. Not when you get your AN fittings to get one that can accommodate your...
  4. OU812IC

    95 Mark Power Steering leak

    Basically... suspend the engine and drop the front cradle/suspension. You can do a search on here and I know you will find a write up on it. Better change the pressure line as well. Change the gasket on the oil filter adapter, a little easier with the cradle dropped. Check your oil pan and...
  5. OU812IC

    Supercharging 98 Mark VIII LSC

    Good luck. Mine took a dump. Hoping to have the motor back in by the end of July. If not I am going to turn it into a pig roaster...
  6. OU812IC

    95 Mark Power Steering leak

    For the short term you can loop/bypass the cooler.
  7. OU812IC

    Higher Stall and Gears? Can't I just do the converter?

    I blew the motor up last Sunday. Not to pieces but I went in a run to tweak the tune after doing the 4k stall and it detonated one too many times. Ooops
  8. VIIIXEN of OU812

    VIIIXEN of OU812

    1998 Lincoln Mark VIII LSC Black on Black Basically a weekend cruiser....Factory air ride, interior and so on Single piece 93 driveshaft turning 4:10 gears and MT ET streets Cobra Intake and IMRC, SAI and EGR delete, relocated air charge temp sensor to the intake by the throttle body Aeromotive...
  9. OU812IC

    Considering A Mark VIII? (Thinking Out Loud)

    I have had a couple myself. Everything above about covers it. Look towards Florida,SOCAL and Arizona for a nice rust free ride. There are a couple of Facebook pages that have some nice cars come up from time to time as well. If I were to buy again I would go to FB and keep an eye out. I have...
  10. OU812IC

    98 LSC Misfire After New Plugs and Wires .... SOS

    I have friends that work at a large Napa store, largest in the Midwest, carter is not what it used to be. They run a LOT of Delfi stuff for the professional shops. Back in the day as a tech we installed exclusively Carter. They seem to have lost their quality standards since then. I just did a...
  11. OU812IC

    98 LSC Misfire After New Plugs and Wires .... SOS

    If your not putting an SC on or Nitrous, a stock pump will be Perfect. Du
  12. OU812IC

    What Fuel Pump to Put in a Gen2 Mark Viii

    I have the aeromotive 340 LPH pump in my 98. I had to go to the junk yard and get a different hump for the pump hat. Others than that it was simple swap. No wire cutting, swapped the pins in the pump connector. I did drill a few holes in the pump assembly. I have pis on here somewhere. Du
  13. OU812IC

    98 LSC Misfire After New Plugs and Wires .... SOS

    Put a pump in it... The regulator is not your problem. If it was leaking fuel that would create the problem you see but it would also be leaking when you pulled the vacuum line off. Du
  14. OU812IC

    In need of some direction on a tuner for my project build

    You will need the handheld of your choice, doesn't really matter until you go to data log. I have a X2 and X4. The X4 is more cooperative when tying in wideband data. You will also need a software license from SCT for another $350. At that point it will be similar to other software you have...
  15. OU812IC

    Higher Stall and Gears? Can't I just do the converter?

    It has been a while.... Did 4:10s . Supercharger is in and finally tuned to near perfection as of this past week. I ran 13.1 with a 2.1 60'. This winter it gets exhaust and a stall. Stall is tbd at at the moment. Du
  16. OU812IC

    10 yrs and she gone. Parts car interest?

    What color and year? I am by Kenosha. Du
  17. OU812IC

    Video Trivia: What's that problem!

    The are many knowledgable people and it won't take you long to figure it out. Many of the tips provided send you back here with a link or LOD. There is plenty of room in this hobby for the two of them, forums and social media... Du
  18. OU812IC

    Blower Motor Disconnected?

    The hole on top is nothing to worry about. Best description I can give you is it is a vent line kinda. The idea is that there should be a hose that goes from the round hole back to the evap case some where. I never found it on my mark either but have seen them on many other cars. I think the...
  19. OU812IC

    New to me advice

    Mistake(s) I made, that I know of..... My MAF is too close to the BOV. Turbulence issue at cruise/light load. When the vacuum pulls the BOV open it jacks with the MAF readings really bad. When I made the discharge tube, I took it to the tuner and asked them to tell me exactly where you do you...
  20. OU812IC

    New to me advice

    Let's see if this works.... https://m.facebook.com/100011359524358/albums/208086849579964/?ref=bookmarks This will give you a link to my FB album, it is "public". If you can't get on let me know. I have notes for most of the pics, part numbers and so on. Du
Back
Top