Search results for query: *

yes throttle body the motor is the black housing you will see the connector

try replacing the TB motor only. You can get them anywhere. Junk Crown VICS. Etc. The brushes wear out.. good luck

Will it drive before FSM kicks in?

Take the thermostat housing off. There is a perch that the shaft sits in and it is probably broken. Good luck.

If you are looking for a hobby, you found one. If not, get rid of it quickly!!!!

SECOND THAT MOTION. CHANGE PUMP

The little motor on the throttle body has carbon brushes that will wear out. I used one from a Crown Victoria on the LS and that solved my problem. It is easy to change.

Could be pump failing ... wait it out

Has the fuel pump been replaced?

Any other symptoms? Fuel pressure code? Throttle body code? Etc.....

thats the ticket I had coolant on the trans bell housing like this guy for a long time. Then one day that hose blew. LOL

thats it look under TB you will see one end. The other end is below the Intake at base of Tstat.

Another thing not mentioned is a coolant hose under intake at base of thermostat housing. It loops back to throttle body.

Oh fuel rail pressure sensor high input PO193 happens only on fast deceleration that's the one whadda u think?

yeah man the sensor on the fuel rail that's the one

I heard that man. What about intermittent high voltage read on fuel pressure regulator. Any experience with that one?

sounds like EGR valve to me

McMaster-Carr

Look man. There is a rubber hose that runs from throttle body under manifold that leaks. It may or may not be available but you can make something up and if you are good you can do it without removing manifold. Try a slightly bigger viton o-ring at the 53mm thermostat housing. Also, if the...