Search results for query: *

because of the snow i have not been able to get on her at all the last couple months. Well its been dry for the last 3 days so i decided to give her a go. Wanted to try out a top run in 3rd gear. well if u own a conti you know it :q:q:q:qs out at the 3-4 shift around 100mph 4.5k rpm. If you...

Diamond Fabrication finally finished my new hood, I'm happy with it except for the little gap over the left headlight, pretty dam good for hand laid. Anyone need a aluminum hood?

Found it on ebay, I got money says it will fit a conti also...

Hooked my scanner up, so if you need some pages scanned out of the owners manual let me know. My manual is a 02, so i'm not sure if it's 98-02 or 99-02.

My ses light has been coming on, lean in both banks. I cleaned my MAF and checked my intake for leaks, nothing i could find. I'm thinking bad 3rd o2 sensor or iac sticking open. Anyone else have any ideas?

Couple more to add to the list. 4 guys in the lincoln and 4 girls in a V6 mustang with some 18's and a saleen body kit. The bet? If you win paul over here will show you his dick, If we win we wanna see some titties. Long story short by 45 we were 4 car lengths ahead. Pulled into the gas...

I like the look, what do you guys think?

I finally got around to putting my fender moldings on today after they been sitting in the barn for a year. They will stand out alot more once I get some rims.

I always get my moofroof tinted, can't stand any light coming in through the top. Well the tint wasn't cutting it so I flat blacked it all out. It looked like crap with my cream interior. I pulled out the annoying slide when I got the car, so I found that, steam cleaned it then ripped the...

I blew one of my 6x8's a couple weeks ago, so I replaced them with 6x9's. Sounded better but not enough power for them. So I threw one of my fusion power plants in a house subwoofer enclosure to see how it would work. I ran one channel of the stock amp wired down to 2 ohms on the dual voice...

Anyone need a new conti crate engine? This ones probably straight from romeo fords. I bet it was never mounted in a car. http://detroit.craigslist.org/pts/643165687.html

Took it upon myself to drop some 6x9's in the rear deck of the conti today. Easy install, well worth it. Alot more bass that does not fade or pop now. To get to them you need to get in the trunk and take the top carpet down. Then push the 6 black clips that hold the center speaker grill...

Was bored so I put my camera behind my license plate cover. Audio sounded like crap when I tried to do a video so I just posted the exhaust clips. Slow take off, 20 to 100, fast take off. http://www.upload-mp3.com/public/viewset/1371

Took those pics for ya. If you could work me out the price for just a MAF setup that would be good. I redid my cobrastars myself. I'll send you pics when it's installed for the conti section on LMS if you want. Also do you have any LMS stickers? One more question, and I know you get alot of...

Finally took some time and fixed up the lincoln. Trans flush with new filter, $247 at fords, 2 dents removed from the drivers door, $97 . 2 new pilot sports for the front (back are a month old) $370. 2 new rear sway bar bushings, $20. $159 for new tags. Washed it, waxed it, cleaned the air...

First of it has a element not air tubes. Drivers side bottom element is out. 3 things I'm gonna check, switch, box under the seat, and continuity on the element. Is their a normal part that goes out on these? Please help, my ass is cold.

Anyone see whats wrong with this picture?

Have not put them on yet, but they sure are pretty.

found these on ebay, look the exact same as my ballast. dam good price. http://cgi.ebay.com/ebaymotors/Xenon-HID-Kit-LINCOLN-AVIATOR-ZEPHYR-CONTINENTAL_W0QQitemZ110207884476QQihZ001QQcategoryZ36476QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

quick burn out http://youtube.com/watch?v=2HnogEAsbM4