Search results for query: *

I had my car back to the body shop and now there is a rubber mount under and above the frame but a probably at least 1" gap between it and the body. Which you can clearly see the ring from the spacer or shim from before. I measured the front and the right side is an inch or so lower as well. I...

I need to get a new front passenger switch/plate for my 98 towncar. It looks like 98-2002 pretty much share most parts. Would any year from 98-2002 work for me or do I need a 98 or 99?

The 2 smalll posts dividing the 1/4 or so of both of my back windows has rust inside and out on the top on both sides. On the outside it is bubbling under the rubber on the inside it seems to have split open the rubber a bit. I was going to get a 4 or 6 piece chrome set to replace the front...

I thought i remenber seeing or hearing of a front end conversion of sorts for the towncar. I was wondering if anybody knew of it, where to get what it costs etc... Thanks

I washed engine yesterday let it dry off sprayed on some plastic conditioner on hoses etc... It started up fine I drove around a bit and parked it. Started it up a couple of hours later drove to a friends house. Several hours later I started it again drove home it was fine. Today drove it to...

I had new FRONT bendix rotors and ceramic pads put one. The mechanic replaced the clips that the pads "sit in" and lubed everything. But I looked and he did not wipe/clean of the rotor surface. Also with these do I need to be easy on the brakes for a certain period of time or whatnot?

as soon as it warms up a bit it goes away but when first turned on and until it warms there is a gas smell comming form both rear pipes. Is this normal, and if not what could cause it?

here is a page with a link and pictures of how to do it with a 98-02 and it also shows the 97- years as well. http://www.crownvic.net/ubbthreads/showflat.php?Cat=&Board=UBB23&Number=858990&page=0&view=collapsed&sb=5&o=&fpart=1

When checking my plugs for correct gap I noticed that in cyl 5,6,7. Or if your in drivers seat its the 3 plugs except the closest plug on drivers side. None of them seemed to have it getting into the engine. One had some on the tip but I think it was from dripping off the plug as I pulled it out...

I was reading about using a breather filter on the intake and leaving the hose from the valve cover hanging there. I was thinking of this only so oil wouldn't get into the intake and gunk up and reduce efficeny of the engine. But couldn't you take the hose off completely and put a filter on...