Search results for query: *

Yes, compressor is engaging and works even when hot air is coming from vents. DATC does not give any codes. Regarding symptoms, then air seems that is heated not just outside. Also when car cools down and is restarted then everything returns to normal. Also not everyday problem appears. Some...

Hi to all! Recently I have noticed a weird thing in my A/C behavior and currently have no ideas where to dig to localize problem. Once the problem appeared on my LS ('2000, V8) while idleing a couple of days ago from all vents A/C started to blow hot air (maybe one side was warmer and the...

Regarding LSE in year 2000, it is interesting, but I also have LS with LSE features and bodykit and the car is manufactured in june 00'. My car had clear (or how it is called) title when it came to Latvia.

When using windshield washer in combination with either left or right turn light on, sometimes when pressing windshield washer button I get a beep and a message something like Check left (it depends on which turn light is on) front light or something like that. At the same time all light are ok...

Solution found :) A little bit burned connector was causing problem with turn light.

Just prepairing myself for something serious :) one reason is, because usually when there are bulbs out, i get warning on message center :) Today will check bulb and hope that it will be dead not something else :)

Yeah yeah i already read joke about blinker juice here :D This lincoln I already have almost three years :) and there are no problems to get any american car to Latvia, even those that are not meant for EU market :) and thats good because i like american cars :) at least something that you...

Hi! Yesterday evening when locking my car noticed that right rear turn signal does not flash. Today tried hazard signals and right turn signal and it does not work either. Meesage display does not say anything about inoperable turn lights (also when looking through status messages). Did not...

If you could find out how mutch shipping would cost and ship to Latvia (it's in Europe), I would be interested :) Mine are peeling a bit and now I decided to use those in winter and for summer buy new set of wheels.

Hi! One question about misfire - could misfire cause engine stalling after taking foot off the gas?

Hi guys! Today while driving around and getting on highway there was a need to accelerate quickly so pushed gas quite hard... rpm where about 1500, at first car gained speed quite normally, but around 2000 rpm it roughly jumped to 2500 - 3000 rpm's (felt like tranny downshifted) and then...

I would suggest to check wireing to DCCV. Could be an issue. Problem on my LS was solved by fixing wireing.

Already looked at this one, but seller does not offer shipping internationally :( So the main problem is that I am from United States.

AS far as I understand they sell Gentex mirrors. How it goes with Gentex wireing for example for just autodimming mirror (without compass and other features) - does it fit plug-and-play with the OEM wireing, or I will have to make new wireing for it?

Ny auto dimming rearview mirror on LS Sport '00 is slowly starting to fail and I an thinking about replacing it. One idea is to replace it with newer mirror with compass. How mutch could OEM mirror with compass cost and how hard is to install it - are there needed any modifications in wireing etc.?

If you can wait till this evening and give me your e-mail address, I could send you info on how to troubleshoot your problem.

Seems like I found my problem - it looks like, there is a problem in wires and that is the reason it cannot close driver side valve properly. Hope today evening I will manage fix the problem :) Already located possible place where there are problems :)

For DATC self diagnostics press OFF + PANEL and then AUTO or OFF + FLOOR and then AUTO. In one case it will show codes that are stored in the memory, if no codes all DATC symbols on display will come on. In another test it will count from 1 to 25 and then show codes if found, if no, then all...

This one tested too, there is all ok with power on middle wire on the DCCV connector.

Thanks to those who sent me TSB service procedures. Today by following those procedures tested DATC system - no luck in finding problem :( All circuits needed to test measured more than 10 volts (one was about 10,5 other were about 14). Tomorrow evening or monday I will flush all my cooling...