Recent content by zzmontyzz89

  1. Z

    replaced my dccv.. and ac stopped working again

    Did you lose hope in a rookie fixing it himself? Haha. But could it possibly be a leak?
  2. Z

    replaced my dccv.. and ac stopped working again

    How can I test the compressor and expansion valve. Also the picture doesn't show the r134a level?
  3. Z

    replaced my dccv.. and ac stopped working again

    What does that mean =/
  4. Z

    replaced my dccv.. and ac stopped working again

    Back the when you said clamp the Hester hoses and see. Whenever its cooler outside and I start it cold. The air blows pretty nice but the passenger side is never as cold as the drivers side.
  5. Z

    replaced my dccv.. and ac stopped working again

    Alright Idk where some of my messages went. But ill say it again. I checked the fan its ok. Their was a hose that I forgot to clamp all the way it was leaking slowly. I clamped it and cleaned all electrical connections and plugged them in all the way. Refilled coolant and proceeded with...
  6. Z

    replaced my dccv.. and ac stopped working again

    Yeh on a cold start the only thing that changes is the passenger side will blow somewhat cooler air thenit normally does. Also at ccooler temperatures outside it blows just a bit cooler. Not much at all. But the rear vents are blowing warm air constantly
  7. Z

    replaced my dccv.. and ac stopped working again

    Ohhh ok cool well I lost the cap lol. So ill clamp the hoses and see if that changes anything. If it makes my ac cold what does that tell you?
  8. Z

    replaced my dccv.. and ac stopped working again

    Ok so the fan speed is doing what its supposed to. But I did notice after I pulled the cold side hose off the ac line it started to slowly leak out from the tip of it. I out my finger on the tip and Ill have freon on it. What's that mean?.
  9. Z

    replaced my dccv.. and ac stopped working again

    Ok after work ill check the condensor for problems. And ill check the fan and see what's going on with that. Thanks for everything man ill post soon.
  10. Z

    replaced my dccv.. and ac stopped working again

    Yes the fan was on the highest setting. I tried with the ac on and recirculate, and without recirculate. Also tried the auto setting with temp set at 60 still and fan on high. What I did notice. The compressor was not cycling. The low side didn't move at all when the ac was on. So does that mean...
  11. Z

    replaced my dccv.. and ac stopped working again

    this was with car running a/c on at 85-87 degrees Fahrenheit outside temp.
  12. Z

    replaced my dccv.. and ac stopped working again

    oh i just seen your question about pressures ill go check them right now
  13. Z

    replaced my dccv.. and ac stopped working again

    i checked the fuse and relay for the a/c clutch, they are working find. personally i think its a clog somewhere...when i started my car today after work it was about 83 degrees outside and all vents were blowing the same air ( cold ). when i started driving thats when it went back to normal...
  14. Z

    replaced my dccv.. and ac stopped working again

    I have the high and low side gauges. They were both where they were supposed to be. I bought the car from a private owner so I don't have the owners manual.
Back
Top